| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heavy Duty Howo 12 CBM Firefighting Trucks
I: Main Technical Parameters
| Outline size LXWXH(mm) | 9670X2500X3565 |
| Maximum total mass | 27600kg |
| Liquid carrying capacity | Water: 8000L, Foam: 4000L |
| Maximum speed | 95km/h |
| Fire pump pressure/flow rate | 1.0MPa/100L/s |
| Pressure/flow rate of fire gun | 1.0MPa/80L/s |
| Fire cannon range Range | Foam: ≥70m; Water: ≥75m (Under 1.0Mpa pressure) |
Chassis
1, Chassis main parameters
| Model | RLQ6688XFA2 |
| Manufacturer | SINOTRUCK |
| Rated engine power | 276kw (380 HP) |
| Engine emission standard | Euro V |
| Driving form | 6*4 |
| Wheelbase | 4600+1350MM |
| Number of drivers and passengers | 2+4 persons |
| Transmission | 10-speed gearbox |
| Power take-off | Full power center take-off |
III. Superstructure and Performance Parameters
Overall arrangement
The whole vehicle consists of two major parts: the firefighter's crew room and the body, and the body arrangement adopts three-split structure, with the equipment box in the front, the water tank in the middle and the pump room in the rear, and the tank is a parallel hexagonal compartment type tank.
1, equipment box and pump room
1, water tank
| Structure | Integral sub-beam structure, liquid tank and attached beam using flexible support flexible connection, liquid tank is equipped with longitudinal and transverse anti-sloshing plate equipment: 2 inlet holes; 2 overflow devices; 2 liquid level sensors; 2 with DN40 valves sewage outlets; 4 water injection port. |
| Equipment box | Material: Q235A high quality profile combined with aluminum alloy profile lap. |
| Volume | 8CBM |
| Tank material | High-quality 304 stainless steel plate; base plate 4mm, side plate and partition are 3mm |
2,Foam tank
| Volume | 4CBM |
| Tank material | High-quality 304 stainless steel |
){kind=link}