Dongfeng Tianjin 12m³ Multifunctional Fire Rescue Water Sprinkler Truck

• Customization: Available
• Warranty: 1 Year
• Type: Rescue
• Model NO.: RlQ523 Fire rescue Truck
• Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
• Volume: 7001-10000L
• Emission Standard: Euro 3
• Transmission Type: Manual
• Payload: 8t
• Fuel: Diesel
• Drive Wheel: 4×2
• Horsepower: 150-250hp
• Condition: New
• Traction Type: 4X2
• Engine Model: Cummins B6.2ns6b210
• Flow Rate of Fire Pump: 40L/S
• Fire Monitor Range: 55m
• Chassis Brand: Dongfeng
• Cabin: 4 Doors with A/C
• Fire Pump: CB10/40
• Material of Tank: Carbon Steel
• Tanker Capacity: 12t
• Fire Monitor Rotation Angle: 360 Degree
• Transport Package: Container
• Specification: 7830-8270× 2420-2450× 2840-2940
• Trademark: RLQ
• Origin: China
• HS Code: 8705309000
• Production Capacity: 300 Units Per Month
• Package Size: 845.00cm * 250.00cm * 345.00cm
• Package Gross Weight: 18000.000kg

Product Description

Special tips

The fire truck accessories in the details page can be replaced or customized according to customer requirements. Please communicate with the salesperson before purchasing.

1,Basic parameters

1. The tank structure of the fire sprinkler truck is oval or square, and the fire pump and gun storage compartment are welded at the rear. It is made of high-quality carbon steel, formed in one step by a large plate rolling machine, and has advanced equipment automatic welding technology, which makes the appearance more beautiful and has excellent sealing performance. The water tank of the whole vehicle tank is 2-3 chambers, with a through hole at the lower end of the middle partition. The tank body is equipped with an anti-sway and anti-wave baffle, which has a wave-proof effect to reduce the impact of the liquid in the tank when the car is driving. The exterior is painted with anti-rust paint and decorative paint.
2. When the fire sprinkler truck uses rivers and ponds as water sources, pay attention to the end of the water suction pipe being completely submerged in the water. In order to avoid inhaling stones or more mud and sand, floating debris, it is best to install a filter device at the water inlet of the water suction pipe. If the water source is shallow, it is necessary to dig the water suction place deeper in advance to ensure that it does not contain debris and does not enter air.
3. When the self-priming water pump is used for the first time, it is necessary to add water, and it is not necessary to add water in the future. When absorbing water, the water inlet pipe system must maintain a certain vacuum degree to absorb water into the tank. The water inlet pipe system must be sealed reliably, the hose cannot be damaged, and the hard pipe cannot have cracks, otherwise it will leak, which will cause the situation where water cannot be absorbed.
4. Whether before absorbing water or before sprinkling water, the power take-off device of the fire sprinkler truck must be engaged when it is parked. Before the arrival of winter, the water in the water pump and water pipe should be emptied to prevent freezing and cracking.

Chassis Description
Cabin	Double row non-longhead cab can turn over
Color	Optional
Allowable person in cab	2/3
Wheel base (mm)	4700mm
Number of axles	2
Total mass	18 tons
Curb Weight	8.21 tons
Traction system	4X2
Tire specification	10.00R20 Steel wire tire
Tire quantity	/
Engine Description
Engine model	Cummins B6.2NS6B210
Horse power	210 horsepower
Emission standard	Euro 3
Up-parts Description
Liquid tanker	12000L
Tanker Material	High quality carbon steel plate,\ anti-rust treatment inside.
Fire fighting pump	CB10/40
Fire fighting nozzle	PS40

Details display

Fire monitor

Rolling door

Fire monitors are widely used firefighting equipment in the global firefighting field. As an effective spraying and monitoring firefighting tool, it has high working efficiency and fast response speed. It can complete difficult tasks in a shorter time, thereby reducing the intensity of work.

Used in the car, it is heat-insulating, moisture-proof and dust-proof. It has the functions of windproof, soundproof and odor-proof.

Fire pump

Tank mouth

Fire pumps are used to stabilize the pressure of automatic sprinkler systems and fire hydrant water supply systems, so that the system water pressure is at the required pressure state. Once the sprinkler or fire hydrant discharges water, it can flow out the water volume and water pressure required for fire fighting. It can also be used for industrial and urban water supply and drainage, vertical water supply in high-rise buildings, and long-distance water supply. It is an essential firefighting tool in many places. Once a fire breaks out, it uses pressure to spray water to extinguish the fire in time, and its use efficiency is relatively high.

For water tank refilling and maintenance access.

Ladder

Sandwich PTO

Convenient and safe to load and unload the tank

The sandwich power take-off is generally used in special vehicles such as fire trucks, high-pressure cleaning trucks, silt removal trucks, cement mixers, etc. The sandwich power take-off is a full-power take-off installed between the engine and the transmission or at the rear of the transmission. It can take all the power from the engine to the transmission. Through the conversion of the speed ratio, it is used to drive high-pressure injection pumps and fire pumps, which require high power or motors.

Rear sprinkler hole

Aluminum Alloy Checkered Plate

It is mainly used for dust suppression and watering maintenance of engineering pavement and newly paved pavement. The post-sprinkling can adjust the working angle according to the needs.

Different from ordinary carbon steel anti-skid plates, the aluminum alloy patterned plate used not only has anti-skid function, but also has anti-rust properties. The appearance is more atmospheric and beautiful. The high-end aluminum alloy material also guarantees the practicality of the product.

Fire water inlet

Fire water outlet

1. External fire hose for gravity discharge; open the water pump for pressurized drainage; long-distance transmission of water source; fire hose front end connected to the fire sprinkler can be used for small-scale fire rescue. 2. It can act on fire water inlet and inject water into the tank.

It is mainly used for field operation of vehicles. Water can be pumped from nearby field water sources (adjust the ball valve position according to the schematic diagram when pumping water. There must be medium water in the water pump) to ensure that the pumping pipe does not leak air. The pumping port can also be used as a gravity port.

Manual Butterfly Valve

It is used to cut off, distribute and change the flow direction of the medium in the tank and fire pump pipeline.

Hand throttle

The driver can connect the fuel injection pump through the lever of the throttle handle. When the handle is turned to the stop position, the fuel injection pump stops supplying fuel and the engine shuts down.

barrel

Place the water pump. Excellent acid and alkali resistance, wear resistance, combustion resistance, strong insulation performance.

Front flush nozzle

It is mainly used for watering, cleaning and dust reduction of highway roads. It can flush small pieces of garbage such as gravel on the road to the roadside, making it easier for sanitation workers to clean up. The front flush can also be equipped with front and side spray devices according to actual usage.

2,Factory Showcase

Hubei Ruili Automobile Co., Ltd. is located in the Ruili Emergency Industrial Park, a new industrial base in Zengdu District, Suizhou City, Hubei Province, the capital of special-purpose vehicles in China, the hometown of Emperor Yan and Shennong, and the hometown of ancient chime bells. The company has a complete vehicle display area, a fully functional production and manufacturing workshop, spray electrophoresis, powder spraying workshop and testing center, high-end and sophisticated production equipment, mature manufacturing technology and excellent technical team, and a modern enterprise management mechanism. It is a diversified automobile company integrating automobile technology research and development, automobile manufacturing and modification, parts production and sales.