| Customization: | Available |
|---|---|
| Type: | Recycling |
| Certification: | ISO9000, CCC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CLW 6 CBM SWING ARM GARBAGE TRUCK | |
| OVERVIEW OF VEHICLE | |
| Overall dimensions | 7370*2500*3350(mm) |
| GVM | 16000(kg) |
| Curb weight | 7000(kg) |
| Rated loading capacity | 9000(kg) |
| Approach/departure angle | 23/15 |
| F/R suspension | 1450/1970 |
| PARAMETERS OF CHASSIS | |
| Driving Type | Manual right hand drive |
| Number of axles | 2 |
| Axle load | 5800/10200 |
| Wheel base | 3950(mm) |
| F/R track base | 1830/1810(mm) |
| Number of tyre | 6+1 |
| Tire specification | 10.00R-20 |
| Leaf spring | 8/10+6 |
| Allowable passengers in cab | 3 passengers |
| Max speed | 90(km/h) |
| PARAMETERS OF ENGINE | |
| Engine model | DETR1567TV |
| Manufacturer | CLW |
| Emission standard | Euro 3 |
| Number of cylinder | 6 |
| Cylinder arrangement | Direct-line |
| Max torque | |
| Minimum fuel consumption at full load | |
| cylinder diameter*distance | 108*132mm |
Air intake form |
supercharged and mid-cooling |
| Fuel type | diesel |
| Displacement | |
Max torque speed |
1400-1600rpm |
| Max output power | |
| UPPER FRAME STRUCTURE | |
| Garbage bucket volume(m3) | 6 m3 |
| Garbage bucket material | Carbon steel Q235 |
| Garbage bucket thickness(mm) | Side:3 bottom:4 |
| Loading Circulation Time (s) | 12-30 |
| Rubbish Discharging Time(s) | <30 |
| Factual loading(kg) | 3000 |
| Power of movement | Hydraulic pump |
| Hydraulic cylinder volume(L) | 60 |
| Dump angle(°) | ≥45° |
| Dump type | Hydraulic cylinder lifting self-loading |
| Hydraulic system pressure(Mpa) | ≤16Mpa |
| Control method | manual hydraulic control on the body side |
| Protective materials: Q235A carbon steel, connection mode: left and right side and bottom protection, and vice beam floor is made of welded joint, the bottom protection and frame connected by welding, ABS . special device: swing arm mechanism, it is mainly used for urban sanitation garbage collection and transportation. | |
| TECHNICAL SPECIFICATION FOR SKIP BINS | |
| 4 pcs of drain holes ,crossmembers under floor ,one barrow door on the end , Fully welded inside and outside,10 mm flat bar welded on the sides ,two times of Primer and two times of top coat , the paint of primer with Zinc-based epoxy (grey colour) , top coat with Urethane . |
|
){kind=link}