| Customization: | Available |
|---|---|
| Type: | Tanker |
| Certification: | ISO9000, CCC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Cabin | Driving type 4X2LHD |
||
| 76 Standard cab, with one bunk, one bed. 70°hydraulically tillable to the front as attached photo for ref. |
|||
| Vehicle Main Dimensions | Overall dimensions (L x W x H)mm | 10655x2500x3258 | |
| Wheel base (mm) | 4600+1350 | ||
| Wheel track (front/rear) (mm) | 2022/1830 | ||
| Approach/Departure angle(°) | 16/42 | ||
| Weight in KGS | Tare Weight | 15000 kg | |
| Gross vehicle weight | 31000 kg | ||
| Rated load | 16000 kg | ||
| Max. driving speed(km/h) | 101 KM/h | ||
| Engine | Brand | SINOTRUK | |
| Type | 6-cylinder in-line with water cooling, turbo-charging and inter-cooling, | ||
| Horse Power(HP) | 290HP | ||
| Emission standard | Euro III | ||
| Gearbox | HW19712, 10 forwards & 2 reverse | ||
| Clutch | Reinforced diaphragm clutch, diameter 430mm | ||
| Steering Gear | ZF 8118,power steering, hydraulic steering with power assistance | ||
| Fuel tank (L) | 300 | ||
| Tire | 12R22.5 tubeless tire, 11pieces with one spare | ||
| Suspension | Front: 9 semi-elliptic leaf springs with hydraulic telescopic double-action shock stabilize Rear: 14 leaf semi-elliptic leaf springs with bogie springs. |
||
| Brakes | Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake |
||
| EQUIPMENT LIST | |
| Name | Number |
| Fire hose | 12 13 |
| Water hose | 10 13 |
| Nozzle | 1 |
| Bubble gun | 1 |
| Dry powder fire extinguisher | 13KG |
| Siamese | 1 |
| Two water | 1 |
| Suction pipe wrench | 2 |
| Rubber mallet | 1 |
| Floor hydrant wrench | 1 |
| Wrench for underground hydrant | 1 |
| Belt bridge | 2 |
| Hose bandage | 4 |
| Hose hook | 4 |
| Fire axe | 1 |
| Fire suction hose | 8 |
| Suction pipe filter | 1 |
| Adapter | 2 |
| Foam suction pipe and wrench | 1 |
| TANK | |
| Volume | 11000KG water 2000KG foam 2000 KG powder |
| Material | carbon steel plate |
| Structure | Welded type steel plate with inner anti - sway plate |
| Equipment | 2 Population hole 2 overflow device 2 Liquid level indicator 2 Sewage outlet |
| FIRE PUMP(PIPING SYSTEM) | |
| Type | CB10/60 |
| Flow quantity | 60 l/s |
| Pressure force | 1.0 Mpa |
| Water diversion time | ≤50s |
| Type of installation | rear type |
| EQUIPMENT BOX AND PUMP ROOM | |
| Material | frame is high quality section steel |
| Structure | Steel structure |
| Open door | Aluminium alloy shutter door |
| FIRE CANNON | |
| Type | PL48 |
| Flow quantity | 48L/s |
| Shooting range | Water 60m foam 55m |
| Pressure force | 1.0Mpa |
| Turning Angle | A level 270 °, pitch - 20 ° ~ 70 ° |
| DRY POWDER SYSTEM | |
| DRY POWDER TANK | |
| Material | 16MnR |
| Quantity of dry powder cans (one) | 1 |
| Volume of dry powder tank (L) | 3000 |
| Max working pressure (M Pa) | 1.4 |
| Low working pressure (M Pa) | 0.5 |
| Structure | Lower part of the tank is equipped with powder discharge and air inlet, the side part is equipped with powder discharge port, and the upper part is equipped with exhaust, pressure gauge seat, safety valve seat and powder discharge port. |
| NITROGEN CYLINDERS | |
| Material | In line with national standards |
| Volume (L) | 60 |
| Pressure (M Pa) | 15 |
| Number | 12 |
| POWDER GUN | |
| Model | PF30 |
| Opening pressure (M Pa) | 1.4 |
| Injection rate (kg/s) | >30 |
| Injection rate (kg/s) | Traffic > 30 |
| Range | >35 |
| Number | 1 |
| Turning Angle (°) | 360 |
| Pitch Angle (°) | -15~+80 |
| Dry powder residual rate (%) | ≤15 |
| POWDER REEL GUN | |
| Number | 1 |
| injection rate (kg/s) | Range (m) |
| Range (m) | > 12 |
| Hose length (m) | 30 |
| PIPELINE SYSTEM | |
| External water inlet | Pump outside the back has a water inlet pipe diameter the Φ 150 mm, outside the straws, inside the buckle Interface (closed cover seal);Suction Φ 150 x 4 m (2) l |
| Internal water inlet | After a 150 mm Φ water, by tanks into the fire pump, 1 Φ only 150 mm Butterfly valve, connect tank and pump |
| Water pipe | 2 Φ 80 mm ball valve and 2 Φ 65 mm ball valve control atmospheric pressure outlet;Both sides have 2 Φ 65 mm ball valve control of medium voltage outlet 2 Φ 80 mm ball valve and 2 Φ 65 mm ball valve control atmospheric pressure outlet; Both sides have 2 Φ 65 mm ball valve control of medium voltage outlet |
| Water injection pipeline | 1 Φ 50 mm in water injection pipeline, through the pump directly to fill the tank There is an external water injection port on each side of the car body |
| Drain off the water main | In order to protect the water pump and the ball valve, at the lowest position in the pipeline to install the drain valve |
| Cooling water line | In order to cope with all kinds of complicated situations, the cooling water pipe and stainless steel ball valve are equipped |
| Foam proportioner | Ring pump |
| Mixing ratio | 6% |
| EQUIPMENT LAYOUT FEATURES | |
| Equipment layout features | Can be equipped with aluminum alloy drawer, horizontal rotation pallet, flip equipment vertical bracket, so that all kinds of equipment placed reasonable, space utilization rate of >80% Use all the equipment in the table of special fixture fixtures for anti-rust, anti-vibration, anti-shedding and anti-scratch |
| FLIP PEDAL | |
| Material | Quality Q235A steel;Skin for decorative pattern aluminum plate |
| Structure | Double locking of spring and door stop, safe and reliable |
| ELECTRICAL SYSTEM | |
| Licence holder | Meet the requirements of GB4785, meet the license plate lighting needs |
| Bridge top | Equipped with long row luxury alarm light, alarm power of 100W;Alarm n The lamp and flash lamp circuits are independent additional circuits, and the controller is installed in the driver's cab |
| Safety light | sign lights are installed on both sides of the lower part, one turn signal light on each side, and indicator lamp is equipped |
){kind=link}